MT12AP is an active speaker that uses a 12-inch mid-low frequency unit combined with a 1.75-inch high-frequency compression driver. The special structure design with a continuous power of up to 350W can be fully applied to the use of stage monitors and Taiwan lip speakers. MT12AP speakers are highly efficient unit configuration It can burst out a maximum sound pressure level of 128dB in a compact volume, which is enough to cope with sound reinforcement applications within a projection distance of 10 meters. The MT12AP speaker has a continuous and smooth phase response, a balanced frequency response, and a constant coverage direction. It can be further processed by DSP Improve performance and reliability.
MT12AP is equipped with a power amplifier module with built-in DSP. The four different parameters processed by DSP can be easily called according to different places, and then the factory preset parameter settings of frequency response, frequency division, phase and transient response can be obtained after careful processing. The effect of, with a good starting point, quickly put into use. The system can monitor the working status of each power module in real time through the RS485 network or remotely control and set the built-in DSP processing.
LOUDSPEAKER DATA | |
MODEL | MT12AP |
CONFIGURATION | 2-way Loudspeaker System |
FREQUENCY RANGE(-10DB) | 55Hz-20kHz |
FREQUENCY RESPONSE (±3DB) | 85Hz-18kHz |
RATED POWER | 350W |
MAXIMUM POWER | 1400W |
MAXIMUN SOUD PRESSURE | 128dB |
COMPONENTS | LF:1x12" |
HF:1x1.73" | |
CROSSOVER FREQUENCY | - |
IMPEDANCE | 8Ω |
NOMINAL DISPERSION ANGLE | 90° x50°(HxV) |
CONNECTIONS | 输入/输出//XLR平衡式 |
RIGGING | 9 Hoisting Point with M8 |
DIMENSIONS/WEIGHT | |
DIMENSIONS(HXWXD) | 363x340x600(mm) |
WEIGHT | N.W: 17.5kg R.W: 20.5kg |