DX08AP is an active full-range speaker suitable for use in small and medium-sized occasions. The DX08AP speaker uses two 8-inch neodymium magnet mid- and low-frequency units combined with a 3-inch neodymium magnet high-frequency compression driver. The optimized unit combination of high-frequency waveguide horn design makes The DX08AP speaker can provide uniform 90-degree constant pointing control in the horizontal direction.
The DX08AP speaker has a small volume-to-weight ratio and a user-friendly design of the hand. It can be easily and quickly completed by a single person to complete the combined installation work. DX08AP is equipped with a built-in DSP processor to process parameter calls to obtain a carefully processed frequency response The effect of factory prefab parameter setting after frequency division, phase, and transient response is quickly put into use with a good starting point. The system can monitor the working status of each power module in real time through the RS485 network or remotely control and set the built-in DSP handle.
The DX215AP low-frequency speaker is equipped with high-power dual 15-inch low-frequency units. Thanks to the compressed design of the cabinet structure, the low-frequency response and sensitivity are effectively improved. The DX215AP is equipped with a high-quality CLASS-D digital power amplifier, which has a small size, light weight and efficiency. The characteristics of high temperature and low heat generation. At the same time, it is equipped with a built-in DSP processor to process parameter calls to obtain the carefully processed frequency response, frequency division, phase, and transient response. The starting point is quickly put into use.
|CONFIGURATION||2-way Loudspeaker System|
|FREQUENCY RESPONSE (±3DB)||80Hz-1.8kHz(LF)/1kHz-18kHz(HF)|
|MAXIMUN SOUD PRESSURE||LF:2x8"|
|LOW CUT FREQUENCY POINT||1.5kHz/24dB/octave|
|NOMINAL DISPERSION ANGLE||90° x40°(HxV)|
|RIGGING||12 Hoisting Point with M8|
|WEIGHT||N.W: 21kg R.W: 24.5kg|
|CONFIGURATION||1 way subwoofer system|
|FREQUENCY RESPONSE (±3DB)||45Hz-250Hz|
|MAXIMUN SOUD PRESSURE||136dB|
|LOW CUT FREQUENCY POINT||120Hz/24dB/octave|
|INPUT 1/OUT 1:1200W|
|WEIGHT||N.W: 65kg R.W: 70.7kg|