MT841AP is an active loudspeaker that uses 4 8-inch neodymium magnetic mid- and low-frequency drivers combined with a 3-inch high-frequency compression driver. Special structure design with continuous power up to 600W, MT841AP unique angle adjuster, can be adjusted according to distance requirements The projection angle of the speakers, MT841AP can be fully used for stage monitoring, stage lip speakers. The efficient unit configuration of the MT841AP speakers can burst out a maximum sound pressure level of 134dB in a small volume, which is enough to cope with sound reinforcement within a projection distance of 15 meters Application. MT841AP speaker has continuous and smooth phase response, balanced frequency response, constant coverage direction, and can further improve performance and reliability after DSP processing.
MT841AP is equipped with a power amplifier module with built-in DSP. The four different parameters processed by DSP can be easily called according to different places, and the factory pre-set parameter settings of frequency response, frequency division, phase and transient response can be obtained after careful processing. The effect is to be put into use quickly with a good starting point. The system can monitor the working status of each power module in real time through the RS485 network or remotely control and set the built-in DSP processing.
LOUDSPEAKER DATA | |
MODEL | MT841AP |
CONFIGURATION | 2-way Loudspeaker System |
FREQUENCY RANGE(-10DB) | 70Hz-2.5kHz(LF)/800-20kHZ(HF) |
FREQUENCY RESPONSE (±3DB) | 80Hz-2kHz(LF)/900-18kHZ(HF) |
RATED POWER | 600W(LF)/90W(HF) |
MAXIMUM POWER | 2400W(LF)/360W(HF) |
MAXIMUN SOUD PRESSURE | 134dB(LF)/133dB(HF) |
COMPONENTS | 4x8"(LF) |
1x3"(HF) | |
CROSSOVER FREQUENCY | - |
IMPEDANCE | 8Ω |
NOMINAL DISPERSION ANGLE | 90° x50°(HxV) |
CONNECTIONS | 1100W+800W |
RIGGING | |
DIMENSIONS/WEIGHT | |
DIMENSIONS(HXWXD) | 509x333x570(mm) |
WEIGHT | N.W: 25.6kg R.W: 29.5kg |