Fl-k2 is suitable for full frequency line array loudspeaker used in large and medium-sized occasions. Fl-k2 loudspeaker adopts two 10 inch low and medium frequency units combined with 3 inch high frequency driver. The optimized unit combination and the design of high frequency Waveguide Horn throughout q series products make fl-k2 loudspeaker provide uniform 120 degree constant direction control in horizontal direction. In the vertical direction, it shows fast high-order attenuation, which can effectively reduce the interference between adjacent modules after array combination.
Fl-k2 loudspeaker is equipped with fast installation and hanging accessories, which can easily and quickly complete the combination and installation of the array. Flexible collocation forms can be combined to form a long-distance projection line array, or as a single point source for sound reinforcement. Fl-k2 has a good volume / sound pressure ratio, which also makes fl-k2 loudspeaker can be used as supplementary sound with larger 12 wire array system, such as stage lip compensation, delay compensation and other independent coverage requirements. The lightweight appearance and weight of fl-k2 can meet the needs of high-quality sound reinforcement in various occasions. The products can be widely used in large and medium-sized theatres, theatres, dance clubs, schools, auditoriums, hotel banquet halls, small and medium-sized live houses, theme parks and sports facilities. Fl-k2 matching fl-k2 SW low-frequency loudspeaker is used for low-frequency extension. Fl-k2 SW low-frequency loudspeaker has the same width as fl-k2, and can be directly combined to realize array hanging or ground stacking.
MODEL | FL-K2 |
CONFIGURATION | High performance 2-way |
passive line array loudspeaker | |
FREQUENCY RANGE(-10DB) | 60-2.5kHz(LF)/800Hz-18kHz(HF) |
FREQUENCY RESPONSE (±3DB) | 70-1.8kHz(LF)/1.2kHz-17.5kHz(HF) |
RATED POWER | 600W(LF)/90W(HF) |
MAXIMUM POWER | 2400W(LF)/360W(HF) |
MAXIMUN SOUD PRESSURE | 134dB(LF)/137dB(HF) |
COMPONENTS | LF:2x10" |
HF:1x3" compression driver | |
CROSSOVER FREQUENCY | 1.5kHz/24dB/octave |
IMPEDANCE | 8Ω(LF)/8Ω(HF) |
NOMINAL DISPERSION ANGLE | 120°x10°(HxV 0°-10°) |
CONNECTIONS | 2xNLT4 F/M ±1(LF) /±2(HF) |
RIGGING | Three point rigging hardware |
DIMENSIONS/WEIGHT | |
DIMENSIONS(HXWXD) | 700 x 539 x319(mm) |
WEIGHT | N.W: 35kg R.W: 43kg |
MODEL | FL-K2SW |
CONFIGURATION | 1 way subwoofer system |
FREQUENCY RANGE(-10DB) | 35Hz-300Hz |
FREQUENCY RESPONSE (±3DB) | 45Hz-250Hz |
DISPERSION ANGLE(-6DB) | - |
RATED POWER | 600W |
MAXIMUM POWER | 2400W |
MAXIMUN SOUD PRESSURE | 132dB |
COMPONENTS | 1x18" |
LOW CUT FREQUENCY POINT | 35Hz/24dB/octave |
IMPEDANCE | 8Ω |
NOMINAL DISPERSION ANGLE | - |
CONNECTIONS | 2xNLT4 F/M ±1 |
RIGGING | 3 point rigging hardware |
DIMENSIONS/WEIGHT | |
DIMENSIONS(HXWXD) | 617x800x551(mm) |
WEIGHT | N.W: 48kg R.W: 52.5kg |